Did you simply get a brand new smartwatch powered by Put on OS 3 and are questioning what you may really do with it? The interface has been fully overhauled, whereas nonetheless retaining a lot of the identical performance that we have come to anticipate. Sadly, the alternatives for a Put on OS 3 smartwatch are slim, however no matter which one you determine on, we have you lined in case you’re searching for one of the best Put on OS 3 suggestions and methods.
Change your watch face
The place’s the enjoyable in having a smartwatch if you cannot customise it to your liking? Out of the field, every smartwatch ships with a couple of totally different “default” watch faces to select from. And this is how one can swap between those which might be pre-installed.
1. Wake your smartwatch by tapping the display or urgent both the aspect button or the crown.
2. Faucet and maintain on the display.
3. Swipe to the left and faucet the Add + button.
4. Choose one of the obtainable watch faces.
5. If crucial, observe the on-screen steps to customise your watch face.
Management your good residence with Google Residence
It is one factor to have the ability to ask for Google’s assist if you wish to activate the lights whenever you get residence from dinner. However it’s equally as superior having the ability to take action proper out of your smartwatch. Alongside the discharge of the Pixel Watch, an all-new Google Residence app for Put on OS was launched making this potential.
1. If you have not already finished so, you will need to set up the Google Residence app from the Play Retailer both out of your Pixel Watch or your smartphone.
2. With the app put in, press the haptic crown to entry the apps put in on the watch.
3. Scroll down and Residence within the app listing.
4. Choose the room that incorporates the system(s) you need to management.
5. Faucet on the group or system you need to management.
Ask Google Assistant for assist
1. Swipe down from the highest of the display and faucet on the ⚙ icon to entry the settings menu.
2. Scroll up till and choose Google.
3. Select Assistant.
4. Faucet on Get began.
5. Now, go to your smartphone and faucet Arrange within the decrease proper nook.
6. Assessment the knowledge. Then faucet on Extra and I agree.
7. Choose I agree.
8. Faucet on OK.
With Google Assistant-enabled, there are 3 ways that you would be able to entry it in case you personal a Put on OS 3 smartwatch:
1. Press and maintain on the highest button, the one above the haptic crown.
2. With the display energetic, say, “Hey, Google.”
3. Press the haptic crown and choose Assistant from the app listing.
Whereas we’re nonetheless ready for Google Assistant to reach on extra of one of the best Android smartwatches, it is a good begin. Particularly when you think about that the Galaxy Watch 5 and Pixel Watch are two of one of the best and hottest choices anyhow.
Customise your {hardware} buttons
Regardless of having a Digital Crown and a devoted secondary button, you may’t really customise the actions that these buttons carry out. Nonetheless, in case you personal the Galaxy Watch 4 or 5, then you definately’re in luck.
1. Out of your Galaxy Watch, open the Settings app.
2. Scroll down and faucet Superior options.
3. Faucet Customise keys.
From right here, there are two totally different sections listed which correlate to the 2 {hardware} buttons. The Residence secret is the one positioned on the high proper, whereas the Again secret is the button within the backside proper.
With the Residence key, there are two totally different “gestures” that may be carried out, as there is a Double press and a Press and maintain possibility. By default, the Double press is programmed to open the newest app, whereas Press and maintain is programmed to launch Bixby.
Moreover, the Double press gesture has fairly a couple of extra choices obtainable.
Use Google Pockets on the go
Top-of-the-line issues about utilizing a smartwatch is the flexibility to make use of it for various duties that you’d usually use your telephone for. Paying for groceries on the retailer is a superb instance of this, and after getting every part arrange, you may simply use Google Pockets in your Put on OS 3 smartwatch.
1. Double-press the crown in your Pixel Watch.
2. Swipe to the left to undergo the tutorial.
3. Faucet the Add card+ button.
4. You’ll be taken to the Pockets app in your Android telephone.
5. Faucet the Add to observe button.
6. Choose one of many pre-existing playing cards hooked up to Google Pay, or faucet New credit score or debit card.
7. If including a brand new card, observe the on-screen steps to finish the method.
There are some situations whenever you might need already hooked up a card to Google Pockets to be used with a special smartwatch, by which case you would possibly see a card already listed within the app. Nonetheless, you may carry out the identical steps listed above so as to add one other card if you wish to use Google Pockets on Pixel Watch.
Obtain one of the best apps from the Play Retailer
The place’s the enjoyable in having a smartwatch if you cannot obtain and use totally different apps on it? Certain, there are well being monitoring advantages and the flexibility to get notifications, however there are additionally a bunch of apps obtainable to obtain. Most of the greatest Android apps in your smartphone even have a companion app for Put on OS 3.
Observe your sleep
Just about each smartwatch, health tracker, and different wearable consists of the flexibility to trace your sleep. This consists of Put on OS 3 watches, albeit with barely totally different strategies.
As an example, the Pixel Watch works at the side of the Fitbit app so as to monitor your sleep. In the meantime, the Galaxy Watch 5 makes use of the Samsung Well being app to do the identical factor. There are professionals and cons to every, however you may study extra with our devoted breakdowns of sleep monitoring with every wearable.
Ping your telephone
We have all been there earlier than. You already know you place your telephone down someplace, however you simply can not seem to keep in mind the place. And because of your smartwatch, you do not have to fret about freaking out.
1. Press the haptic crown in your Pixel Watch to get up the system. Now, there are two methods to make use of your watch to seek out your telephone.
2a. Swipe down on the display to entry the short toggles.
3a. Discover the icon that appears like a telephone with two partial circles and faucet on it.
or
2b. Press the haptic crown a second time to entry the put in apps.
3b. Scroll till you see Discover my telephone within the listing and faucet on it.
4. After utilizing both of those strategies, your watch will present Telephone ringing and an X in a circle to cancel the motion.
Flip off sounds out of your telephone
It does not take a lot to get inundated with buzzes, beeps, and pings all day lengthy. That is very true if in case you have a number of units making an attempt to ship duplicate notifications all over. Whereas we won’t communicate to your tablets or computer systems, you may make it so any notifications that arrive in your telephone, solely trouble you whilst you’re carrying a smartwatch.
1. Open the Pixel Watch app in your telephone.
2. Faucet Notifications.
3. Scroll down and Faucet Mute Notifications.
4. Below the Telephone part, faucet the toggle subsequent to Mute notifications.
Go away your telephone at residence
Irrespective of the rationale why you would possibly need to go away your telephone behind, you do not want a community connection so as to maintain utilizing your smartwatch. Whereas the LTE connectivity does come in useful, that is not essentially one thing that everybody needs to spring for. Fortunately, there are many issues that your smartwatch can nonetheless do if it isn’t linked to the web.
- Inform time and show the date.
- Set an alarm.
- Use the stopwatch.
- Use the timer.
- View your calendar for at the moment.
- Show your step rely.
- Show your coronary heart fee (in case your watch has this function).
- Change your watch face.
- Put your watch in airplane mode.
- Hearken to music by means of your watch.
Observe your coronary heart fee
In an effort to offer you as a lot details about your well being as potential, lots of the greatest wearables are geared up with a well being fee monitor. A few of that are higher than others, however on the very least, you can regulate what is going on on.
Each the Pixel Watch and Galaxy Watch 5 are geared up with the mandatory sensors to trace your coronary heart fee. And the expertise has reached a degree the place each Google and Samsung have carried out steady coronary heart fee monitoring.
Because of this you will not must manually open the app simply to see the place your coronary heart fee is at. As an alternative, you may simply look at it from a complication, or open the suitable app primarily based on which Put on OS 3 smartwatch you might be utilizing.
Management your telephone’s digicam
Foldable telephone house owners however, are you bored with making an attempt to line up the right shot out of your telephone, solely to finish up with a slightly-blurry picture? Or perhaps you are making an attempt to prop up your telephone to take a bunch picture. Effectively, as a substitute of counting on the built-in timer, you need to use your Put on OS 3 smartwatch to take a photograph or video out of your telephone.
1. Press the haptic crown in your Pixel to entry the apps listing.
2. Scroll down and faucet Digicam.
After a couple of moments, you will see a preview of your digicam seem in your watch face, full with a Shutter button on the backside. Nonetheless, this solely works if in case you have paired the Pixel Watch with a Pixel telephone.
Those that have a Galaxy Watch 4 or 5 paired with a Samsung telephone can reap the benefits of Digicam Controller. That is an app that was launched in 2023 following the discharge of the Galaxy S23 lineup.
1. Wake your Galaxy Watch.
2. Swipe up to disclose your App Drawer.
3. Find and faucet the Digicam icon.
4a. Await the Digicam app in your telephone to open.
4b. Await the preview to complete loading in your Galaxy Watch.
5. Line up the image that you simply need to take.
6. Faucet the Shutter button.
Very like the Pixel Watch, Samsung additionally supplies a couple of totally different choices when utilizing Digicam Controller. These embrace issues resembling with the ability to set a timer, swap to video recording, and think about your gallery.
Pair your earbuds
Gone are the times whenever you needed to depend on your telephone for actually every part and something. Now, you may even hearth up your favourite music streaming service and take heed to music proper out of your watch. You may simply have to pair your Bluetooth headphones with the watch, first.
1. Put your earbuds in pairing mode. It will range relying on the mannequin that you’re utilizing.
2. Out of your Pixel Watch, swipe down on the watch face to disclose the Fast Settings panel.
3. Faucet the Settings (cog) icon.
4. Faucet Connectivity.
5. Choose Bluetooth.
6. Faucet the Pair new system button.
7. Choose your earbuds from the listing of accessible units.
8. Faucet the Checkmark button to substantiate the earbuds you need to pair.
Get higher battery life
Over time, battery life on smartwatches has been a blended bag, and actually, that continues to be the case. The Galaxy Watch 5 Professional is basically the one Put on OS 3 smartwatch that may really final for a number of days. However even then, there are a couple of totally different steps you may take to try to squeeze much more juice out of your smartwatch.
- Flip off AOD
- Change the display timeout
- Modify the Vibration depth
- Flip off “Hey Google”
- Allow Energy Saving Mode
- Flip off notifications
- Uninstall apps you don’t use
- Decrease the display brightness
- Theater mode
Examine for an replace
We’re extraordinarily grateful for the truth that smartwatches are getting updates frequently. And whereas the method won’t be as fast as we’d hope, it is nonetheless higher than it was once. This is how one can test for an replace in your Put on OS 3 smartwatch.
1. Out of your Pixel Watch, swipe down on the watch face to disclose the Fast Settings panel.
2. Faucet the Settings (cog) button.
3. Scroll down and faucet System.
4. Faucet System updates.
5. If an replace is obtainable, wait for it to be downloaded and put in.
If an replace is obtainable, you’ll doubtless see a immediate informing you that the downloading course of has began. As soon as the replace has completed downloading, the Pixel Watch will reboot, exhibiting an “Putting in replace…” message.
Replace your apps
Even in case you by no means obtain any apps from the Play Retailer, there are nonetheless a couple of apps which might be pre-installed with Put on OS 3. Nonetheless, as a substitute of ready for a system replace to get new options, you may replace your apps proper from the Play Retailer.
1. Open the app drawer in your respective Put on OS 3 smartwatch.
2. Find and faucet the Play Retailer app icon.
3. Scroll to the underside of the primary display and faucet Handle apps.
4. If relevant, faucet the Replace All button.
5. If you would like, it’s also possible to replace particular person apps by first tapping them.
6. Then, faucet the Replace button that seems.
Take a screenshot
The tactic for taking a screenshot on any Android smartwatch varies relying on the mannequin. As an example, with the Galaxy Watch 5, you may simply press the Residence and Again key concurrently. Then, the display will flash, simply as you will discover when taking a screenshot in your telephone.
Sadly, the identical cannot be mentioned for the Pixel Watch, as you will have to first allow Developer Choices in your telephone. We aren’t precisely positive why that is the case, nevertheless it’s only a minor hurdle to beat. That being mentioned in case you do not have already got these choices enabled, try Jerry Hildenbrand’s explainer which covers all of it.
1. Open the Watch app in your smartphone.
2. Faucet on the three dots within the higher proper nook.
3. With the display exhibiting in your Pixel Watch that you simply need to screenshot, choose Take display shot on watch.
There’s one thing else value stating on the subject of taking a screenshot on the Pixel Watch. The screenshots will not be mechanically saved to your telephone’s gallery, which means that it’s important to manually save or share them. When a screenshot is taken, a notification seems in your telephone, and tapping that can open your telephone’s share sheet menu.
Allow Fall Detection
Fall detection on the Pixel Watch was a function that Google introduced alongside the launch of its first wearable, nevertheless it solely not too long ago turned obtainable. With this enabled, your Pixel Watch will ask you in case you’re okay and in case you do not reply, it should mechanically name emergency companies.
1. Out of your Pixel Watch, press the crown.
2. Scroll by means of your listing of put in apps and faucet Private Security.
3. Faucet Fall detection.
4. Faucet the toggle to allow Fall detection.
5. Faucet Whereas utilizing the app to allow location entry.
6. Faucet the toggle subsequent to Enhance fall detection.
Put on OS 3 is best than ever
Put on OS 3 is much from good, however in case you take a look at the state of Google’s software program now, in comparison with Put on OS 2, it is a night time and day distinction. As an alternative, the largest grievance you might need is when the replace will lastly come to your smartwatch. At present, there are solely a handful of smartwatches with Put on OS 3, however we’re nonetheless conserving our fingers crossed that it will change within the close to future.
Nearly good
Google’s first smartwatch ended up delivering on plenty of the rumors that have been unfold over time. Not solely is the Pixel Watch smooth and stylish, however Put on OS 3 is snappy and responsive.
The default for many
Samsung’s smartwatches proceed to be a number of the hottest and for good motive. The choice to ditch TizenOS in favor of Put on OS has paid dividends for each Samsung and Android customers.
